We supply two different types of multi tip connector that allow you to select the most appropriate plug and set it to a centre positive or negative connection. Note: Always connect the output plug before you connect to mains power!

Your equipment and/or existing
power supply should identify the
polarity that is required by using
an illustration. An example can be
seen here.
Connector Type 1
Markings on the plug and on the socket enable you to select the appropriate connection quickly and easily.

Select the connector that you require and line up the required polarity side arrow with the arrow on the socket.

Note: N93AA (SP2001GS/7MC) does not have the option of polarity connection it is set as default with a centre negative polarity.
Connector Type 2
Select the connector that you require and line up the required polarity side symbol with the "+" on the socket. i.e. if you require a centre or tip(for jack plugs) positive connection line up the two "+" symbols.

Last Amendment: 20/12/2006 15:16:50