12V 4A Dual Stage SLA Battery Charger - BCAD12-4-U
Home
>Car Battery Charger, 12V 4A
>12V 4A Dual Stage SLA Battery Charger
|
DescriptionAutomatic charger for 12 V car batteries up to 60 Ah. Battery is connected with the charger via crocodile clips; Indication of charging status during charging process (WU-characteristic curve); Automatic termination of charge when charging process is completed; Indication of current charging status of the battery when mains plug is not plugged in while battery is connected; Charging current of 4 A
Case Details
184 x 112 x 86 mm
|
General Specifications
| Input Voltage |
230V ±10% |
| Input Frequency |
50 Hz |
| Output Voltage |
12Vdc at 230Vac and capacitive load |
| Output Performance |
4A at 230Vac and capacitive load |
|
At 230VAC & captive load, 4A ? 10% (6 ARMS)at 12V |
|
At IBAT = 100mA, ambient temperature 20°C and after 4 hours of operation on a 20Ah or 40Ah battery |
| Constant Voltage Adjustment |
Cycling Mode 14.5V ±0.2V |
|
Floating Mode 13.8V ±0.2V |
| Voltage Monitoring: |
|
| Cycling mode (default mode) |
At the connection of a battery the charging starts in cycling mode |
|
When the battery voltage reaches 14.5V ±0.2V, the charger automatically switches to floating mode |
| Floating mode |
At the end of charge, the battery voltage is maintained constant, 13.8V ±0.2V |
|
If the battery voltage decrease lower than 12.5 V ? 0.2 V then the charger switches back to cycling |
|
and the charginf current decreases down to a trickle to keep the battery fully charged. |
| Operating Temperature |
-10°C to +30°C |
| Protection |
Against internal short circuit with a fuse in secondary |
|
Against overloads with an automatic circuit breaker in secondary |
|
Against short circuits and wrong polarity by electronics |
| Safety |
Complies with EN60-335-2-29 |
|
Complies with EMC directive 89/336 EEC |
|
 |
Pricing
| Price £ |
Quantity |
| £27.23 |
1-5 |
| £24.50 |
6+ |
|
| Buy This Product |
