200W ATX Power Supply - HP200-NLXAT
Home
>200W Hipro ATX Power Supply
>200W ATX Power Supply
(1).jpg)
|
Pricing
| Price £ |
Quantity |
| Ex-VAT |
Inc-VAT |
|
| £15.54 |
£18.26 |
1-5 |
| £14.76 |
£17.34 |
6+ |
Buy This ProductDescriptionThis 200W High Quality ATX power supply makes the ideal replacement for your computer power supply. Constructed to exacting standards to provide the last word in reliability and quality for home computing.
Case Details
140 x 150 x 86mm
|
General Specifications
| Input Voltage |
90-132VAC/180-264VAC; ?1V selectable via switch |
| Input frequency |
47Hz-63Hz |
| Inrush current |
40A at115 VAC, 80A at 230 VAC |
| Input current |
5A at 90-132 VAC, 3A at 180-264 VAC |
| Remote on/off control |
Digital TTL Level Signal |
| TTL Signal |
DC Output |
| High |
Off |
| N/C (Open) |
Off |
| Low |
On |
| Overshoot |
Turn on and turn off overshoot does not exceed 10% over normal voltage |
| Over voltage protection |
The power supply will shutdown should the voltage reach the following levels: |
|
5V : 5.5-7.0V, 3.3V : 3.5-4.5V |
| Short circuit protection |
Should a short circuit condition occur the unit will shutdown. |
| Hold up time |
16mS minimum |
| Power good signal |
100mS minimum, 500mS maximum |
| Operating temperature |
+10°C to +40°C |
| Storage temperature |
-20°C to +70°C |
| Insulation resistance |
Between input and output or input and frame - 50mW min at 500Vdc |
| Dielectric Strength |
Between input and output or input and frame - 1500Vac, 1 minute |
| Safety Standards |
Meets UL1950, CSA C22.2 Level 3, EN60950 & Nemko |
|
 |
