 |
|
|---|---|
| Specialising in power supplies, battery chargers, laptop adaptors, mobile phone chargers and computer power supplies. |
|
|
|---|---|
| Specialising in power supplies, battery chargers, laptop adaptors, mobile phone chargers and computer power supplies. |
If you have a motorbike, sports car, classic car, caravan or motorhome that you don't get the opportunity to use for weeks or months at a time you no doubt have to check the battery before you can even think about using it - why not purchase a battery charger that will ensure your battery is fully charged when you need it.
We offer a range of 6V and 12V Sealed Lead Acid (SLA) battery chargers that provide intelligent and automatic charge functions as two stage Three stage, dual stage and constant voltage options
New to our range are the unique series of CTEK compact and flexible battery chargers for all lead-acid batteries.CTEK chargers are ideal for most applications!
Sealed Lead Acid (SLA) Battery Chargers suitable for charging Caravans, Car batteries, boats, gardens, motorcycles, RV's, snowmobiles, trucks, agricultural applications...
Found 19 products Displaying 1 to 19
| Product | Description |
|---|---|
| A* CTEK Multi Vehicle Battery Charger XS 3600 | |
|
Capable of fully charging a flat battery over night and after 30 minutes will give the battery enough charge to start a car. The XS 3600 has a fully automatic, four step charge which charges Wet, MF, GEL and AGM lead-acid batteries from small 1.2Ah to large 120Ah. This charger can be switched between bike and car mode and has an extra setting for cold weather and batteries such as Odyssey which like slightly more power. The XS 3600 is easy to use, you do not need to make any settings. The charger adapts the charge to suit the battery and switches to pulse maintenance charging when the battery is fully charged. |
Details |
|
| A* CTEK MULTI XS 7000 Universal Battery Charger | |
|
The XS 7000 is a fully automatic, six step charge which charges Wet, MF, GEL and AGM lead-acid batteries from 14Ah to 225Ah. The XS 7000 is mainly used in the leisure market and for batteries which are continually being discharged. More powerful then the 3600 and with more user settings it is easy to use and can also be used as a power supply. The charger adapts the charge to suit the battery and switches to pulse maintenance charging when the battery is fully charged. The MULTI XS 7000 can also be used as a power-supply unit for operating equipment that requires 13.6V and a maximum of 7A. The charger is easily fitted in place using 2 screws should you wish to mount it. XS 7000 is tested and approved by Intertec SEMKO AB. S-marked and conforms to the following standards EN 60335-1, EN 60335-2-29, EN 61000-3-2, EN 61000-3-3, EN55014-1. |
Details |
|
| A* CTEK Optimal Maintenance Charger XS 800 | |
|
The XS 800 has a fully automatic, four step charge which charges 12V lead-acid batteries (Wet, MF, GEL and AGM) from 1.2Ah to 32Ah. The charger can also be used for maintenance charging of 12V lead-acid batteries from 1.2Ah to 100Ah. The XS 800 is easy to use, you do not need to make any settings. The charger adapts the charge to suit the battery and switches to pulse maintenance charging when the battery is fully charged. The charger is easily fitted in place using 2 screws should you wish to mount it. If the battery is difficult to access, the lead with eyelet terminals can be mounted to the battery, and the quick connectors are located so that it is easily reached for charging. You can also purchase additional leads allowing you to have one lead with eyelet terminals fixed to all your vehicles with batteries that are difficult to get at, and charge them simply from the same charger. XS 800 is tested and approved by Intertec SEMKO AB. S-marked and conforms to the following standards EN 60335-1, EN 60335-2-29, EN 55014-2, EN 55022, EN 61000-3-2 and EN 61000-3-3 |
Details |
|
| Automatic Sealed Lead Acid Battery Charger, 2-24V | |
.jpg)
|
ALCS2-24A is a plug-in charger for maintenance free lead acid batteries 2-24 V and 2-24 Ah. Automatic adjustment to battery voltage; Charge control with IU or U curve; Charging status indicators; Overcharge protection and trickle charge; Short-circuit proof; Protection against reverse polarity; Includes crocodile clips; For stand-by and parallel operation. |
Details |
|
| Car Battery Charger, 12V 4A | |
|
Automatic charger for 12 V car batteries up to 60 Ah. Battery is connected with the charger via crocodile clips; Indication of charging status during charging process (WU-characteristic curve); Automatic termination of charge when charging process is completed; Indication of current charging status of the battery when mains plug is not plugged in while battery is connected; Charging current of 4 A |
Details |
|
| Car Sealed Lead Acid Battery Charger | |
|
|
Details |
|
| Car SLA Battery Charger | |
|
|
Details |
|
| Caravan Battery Charger, 12V 12A | |
.jpg)
|
L08AB is a switch-mode power supply utilising the latest technology designed for caravan battery charging to give a maximum 160 watts at 12 volts dc suitable for use in charging 12 volt lead acid batteries up to 120 AH. The output voltage is set the recommended float voltage for dealed batteries of 13.8 volts, increasing to 14.1 volts a current increases to compensate for cable voltage drop. Housed in a steel case, mains input is supplied through one metre cable with on/off switch. |
Details |
|
| Caravan Battery Charger, 12V 16A | |
|
A switch mode power supply utilising the latest technology to give a maximum 224 watts at 12 volts DC suitable for use in charging 12 volt lead acid batteries up to 160AH. The output voltage is set to the recommended float voltage for sealed batteries of 13.8 volts, increasing to 14.1 volts as current increases to compensate for cable voltage drop. Housed in a steel case, mains input is supplied through one metre cable with on/off switch. The output is protected by a 25 Amp circuit breaker to terminals accessible through slots to the front of the case suitable for 6.35mm push-on receptacles. |
Details |
|
| Constant Voltage Sealed Lead Acid Battery Charger | |
|
Suitable for sealed lead-acid type batteries from 2Ah to 5Ah. At the end of the charge the battery voltage is maintained at a constant level of 6.9V and the charging current decreases to a trickle to keep the battery fully charged. The charger is protected against internal short circuits via a thermal fuse and output short circuits, overloads and incorrect polarity by electronic limitation of the output current. The charger can be left connected to the battery. |
Details |
|
| Constant Voltage SLA Battery Charger, 12V | |
|
Desktop charger for maintenance free 12 V lead acid batteries 2-40 Ah. 2 A charging current; Charge control with IU or U curve; Charging status indicators; Secondary output with open ends; Overcharge protection and trickle charge; Short-circuit proof; Protection against reverse polarity; Includes crocodile clips and spade terminals; For stand-by and parallel operation. |
Details |
|
| Constant Voltage SLA Battery Charger, 12V | |
|
Suitable for charging 1.3-3.5Ah sealed lead-acid batteries. At the end of the charge the battery voltage is maintained constant at 13.8V and the charging current decreases to a trickle to keep the battery fully charged. Protected against internal short circuits via a thermal fuse and output short circuits, overloads and incorrect polarity by electronic limitation of output current. The charger can be left connected to the battery |
Details |
|
| Desktop Charger for 12V Lead Acid Batteries | |
|
Two-step desktop charger for maintenance free 12V lead acid batteries. 3Ah to 60Ah. Worldwide use due to electronic switch mode power supply and interchangeable power supply (available as accessory); 3 A charging current; Charge control with IU or U curve; Charging status indicators; Overcharge protection and trickle charge; Short-circuit proof; Protection against reverse polarity; Includes crocodile clips and spade terminals; For stand-by and parallel operation. |
Details
|
|
| High Power Battery Charger, 12V | |
|
Designed for lead acid batteries featuring 3 stage charging characteristics, automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-360 can comply with the harmonic requirements of EN61000-3-2. Equiped with an IEC320 C14 AC Inlet and ON/OFF switch this unit is very convenient for both household and general consumer use. The 48.5mm low profile design also solves a lot of installation troubles and space issues. With reverse polarity, short circuit, overload, over voltage and over temperature protections it is ideally suited as a main power source or back up system. |
Details |
|
| High Power Battery Charger, 12V | |
.jpg)
|
Designed for lead acid batteries featuring 3 stage charging characteristics and the automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-300 can comply with the harmonic requirements of EN61000-3-2 & equiped with an IEC320 C14 AC Inlet and ON/OFF switch this unit is very convenient for both household and general consumer use. The 48.5mm low profile design also solves a lot of installation troubles and space issues. |
Details |
|
| High Power Battery Charger, 24V | |
.jpg)
|
Designed for lead acid batteries featuring 3 stage charging characteristics and the automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-300 can comply with the harmonic requirements of EN61000-3-2 & equiped with an IEC320 C14 AC Inlet and ON/OFF switch this unit is very convenient for both household and general consumer use. The 48.5mm low profile design also solves a lot of installation troubles and space issues. |
Details |
|
| High Power Battey Charger, 24V | |
|
Designed for lead acid batteries featuring 3 stage charging characteristics, automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-360 can comply with the harmonic requirements of EN61000-3-2. Equiped with an IEC320 C14 AC Inlet and ON/OFF switch this unit is very convenient for both household and general consumer use. The 48.5mm low profile design also solves a lot of installation troubles and space issues. With reverse polarity, short circuit, overload, over voltage and over temperature protections it is ideally suited as a main power source or back up system. |
Details
|
|
| Motorcycle Battery Charger, 12V | |
|
MC06A12T is a intelligent 12V motorcycle battery charger designed to deliver the exact amount of charge automatically every time. The unit is microprocessor controlled and suitable for charging lead acid batteries. The charging regime is designed to give the maximum life expectancy of the batteries. A sophisticated software program continuously monitors the battery life to maintain it in peak condition and to make sure the battery is 100% charged when ready for use. Supplied with crocodile clip leads for connecting directly to the battery and a fused battery hook-up lead assembly for connecting permanently to the battery for quick and easy connection to the charger. |
Details |
|
| Motorcycle Battery Charger, 6V | |
|
MC06A6T is an intelligent 6V motorcycle battery charger designed to deliver the exact amount of charge automatically every time. The unit is microprocessor controlled and suitable for charging lead acid batteries. The charging regime is designed to give the maximum life expectancy of the batteries. A sophisticated software program continuously monitors the battery life to maintain it in peak condition and to make sure the battery is 100% charged when ready for use. Supplied with crocodile clip leads for connecting directly to the battery and a fused battery hook-up lead assembly for connecting permanently to the battery for quick and easy connection to the charger. |
Details |
|
| Found 19 products Displaying 1 to 19 | |
BS-EN-ISO 9001:2000 certified
